PCBequip Besoram
BESORAM PCB equipment trade to the PCB Industry
Wet Processing Innerlayers
IS DES line 30"
ID# 51-52-53
IS International Suplies DES line ( Devloping,Etching,Stripping ) speed 2.2m/min by Cu 35u
material tickness min. 0.05mm max. 6mm,transport width 800mm.
Devmaster 30" Double Develop Chamber, Quad Rinse Cascade, & Exit
Etchmaster 30" Double Etch Chamber, Quad Rinse Cascade, & Exit total titanium build,with cupri cloric regeneration, feed & bleed system.
IS international Suplplies Stripmaster 30" Double Strip Chamber, Quad Rinse Cascade, & Exit and with Drum Filter System ,includes SHD dryer.The line is complete rebuild , state like new.
Höllmuler DES line
ID# 56
Hollmuler DES line speed 1.6m /min by Cu 35u, materiaal 0.05mm to 6mm, Transport width 620mm ,2 x etch chabers 1200 mm, triple cascadereplenisher ,quadriple rinse , inspecting zone, 1e stripping 2000 mm, 2e stripping 600mm, dryer, exit ,drum filter, Simatic PLC with cupri cloric regeneration , feed & bleed systhem. Rebuild.
IS chemical copper cleaner innerlayers 30"
ID# 40
IS International Suplies chemical copper cleaner before innerlayer lamination, material tickness min 0.05mm, max.6mm .
Transport width 800mm, 5x cascade rinse - dryer
IS Resco pumice jetspray Flex materials
ID# 130
Resco Jetspray ,aluminium oxide spraying , gives a perfect bonding adheranse on flex materials,
also useful for copper cleaning on verry thin materials.
Chemical cleaning, rinse, spraying bottom site chamber, spraying top site chamber,
rinse with centrifuge recovery system of the abrasive. transport width 620 mm.
CRH copper cleaner line
ID# 119
Chemical cleaning before dry film lamination, 3 x cascade rinse , micro etch , 3x cascade rinse and dryer.
Pill Innerlayer Mec bond line
ID# 200
Pill Mec bond Line horizontal befor innerlayer pressing , transport width 650mm, PCB tickness 0,05 - 5mm.
Inlet 500mm,spray cleaner 500mm, 3x cascade spray rinse, 1000mm spray micro etch,2x cascade spry rinse, acid spray, 3x cascade rinse, drying , outlet.
IS innerlayers oxide line 30"
ID# 82
Chemcut innerlayer oxide line
ID# 84
Chemcut Oxide Line, transport width 610 mm. Input-chem chamber, 2x recir. Rinse, rinse,
double spray oxidation module 2x700mm, 2x rinse module ,
warmwater and warm air drayer, exit, total lenght 7m